Will This Finally Fix The Bombi For Good?
703,583
Published 2024-05-12
Download my FREE app at www.morrstuff.com/
Subscribe / @mattsoffroadrecovery
Watch MORR Videos:
Chevy Suburban Makes A Huge Mistake!
• Chevy Suburban Makes A Huge Mistake!
I Can't Keep Doing This...Toyota Prius Off Roading Again!
• I Can't Keep Doing This...Toyota Priu...
This Is Why The Bombi Keeps Breaking!
• This Is Why The Bombi Keeps Breaking!
This RV Recovery is Awful!
• This RV Recovery is Awful!
I Leave, So They Build A 6x6 Off Road Rollback!
• I Leave, So They Build A 6x6 Off Road...
Not Again...This Trail Too Dangerous For Off Roading!
• Not Again...This Trail Too Dangerous ...
This Is Not What I Expected...Freedom 500
• This Is Not What I Expected...Freedom...
Need a cool Hat, T-shirt, or Rope:
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsoffroadrecovery.com/
Matt’s Straps, how we tie down our vehicles
mattsoffroadrecovery.com/coll...
Matt's Tools: Tool Burrito
mattsoffroadrecovery.com/products/matts-tools-tool…
Arcdroid CNC: arcdroidcnc.com/?aff=19
Check out the Miller Multimatic 220:
www.millerwelds.com/equipment/welders/multiprocess…
Check out the Miller Arcstation:
www.millerwelds.com/accessories/workstations/arcst…
10% Off Discounts with our Friends: Use Promo Code MORR
Rock Slide Engineering
rockslideengineering.com/
Barnes 4WD
www.barnes4wd.com/
Yankum Ropes
yankum.com/
Rock Slide Engineering
rockslideengineering.com/
Flog Industries
flogindustries.com/
Yukon Gear & Axle
www.yukongear.com/
Full Throttle Battery
fullriverbattery.com/battery-series/ft-series/
Rugged Radio
www.ruggedradios.com/:
Golen Engines: Use the code MORR for $200 off at golenengineservice.com
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B071RXKC7M/ref=as_li_tl?…
Follow us on Facebook!
www.facebook.com/mattsoffroadrecovery
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery!
This video contains a paid advertisement
All Comments (21)
-
Somebody declawed my hammer-I just lost it😂😂😂.
-
Put a pin on the bottom of the lift pads that goes in the hole on the lift arms, so an arm does not slip out from the under the lift pad.
-
I have to say, Jake has been a great addition to the channel. He’s quite a character, and seems to be just a super cool dude.
-
Jake holding it together after watching the boss drill too much of a hole 🤌😂 So perfect, well done sir!
-
The declawed hammer is brilliant! If Tom did that he is an evil genius with a good sense of humor. 🤣
-
Matt matching his employees to Mash characters was hilarious. 😅🤣😆
-
My daughter turned 13 in 2013 and I caught her watching MASH and laughing at the witty humor and one liners. Totally surprised she got it. She said if you listen to what they’re saying it’s hilarious but you need to pay attention or you’ll miss it. Yep, that was how it was and some got it and some didn’t get it. Great show.
-
Katelynn's smile every time she is in that race car is infectious!
-
It never ceases to amaze me. Every youtube channel gets parts from paint or powder coat and immediately drills holes into the parts.
-
Kudos for the Mars Rover reference. As an electronics designer of the Mars Rovers I tip my hat to all of you at MORR. By the way, doing wiring is just like solving a challenging puzzle. Very satisfying. Cheers! (Oh, and I would be happy to come to your shop and help out with the wiring - and YES you crimp those ring terminals first then heat gun them).
-
You folks ROCK! Just an FYI I soldered my battery cable lugs on my boat years ago. Did NOT crimp them. I had starter problems for months till my brother was actually looking at the soldered cable lug as I cranked it. He noticed the solder melting, as soon as it stopped cranking it hardened back up. I NEVER soldered battery cable lugs since. Again just an experienced FYI
-
Wouldn't hurt to give Chad a call with your wiring questions. He might tell you that wire connectors in automotive applications should be crimped, not soldered - including those big cable lugs. The solder stiffens the wire which can cause it to eventually break due to fatigue caused by vibrations. There's also a chance of the connections becoming desoldered if there's ever a high load on the wiring.
-
So, you got the heater back in October, winter is now long gone, and now you are going to install that heater. Right on MORR Schedule 😂
-
A lot more people in the world need to be as happy as Katelynn getting TO THE RACECAR! 😂😁🤟
-
When soldering those terminals onto the large wires, the second one you did is a cold solder joint and will be brittle. The wire is cold and the solder is hot, but the wire will not be hot enough to pull the solder into the wire so it’s just connected on the exterior. That one is likely to break eventually. When soldering like that, all components must be heated.
-
That was us who sent you the banana phone. Big fans from Mississippi. Thanks for all you do.
-
I love the fact that Matt shows his roofer past with his love of claw hammers and his out look on things like, it only needs to look straight from the gourd. The fact that some one cut the claws off his hammer had me smiling, But as a carpenter myself I fully understand his love for the claw hammer.
-
Do you realize how great that sounds? “Katelynn has a rock crawling competition she’s going to”….That is so freaking awesome.
-
Katelynn is always smiling. Makes me happy.
-
My daughter sat with my dad when he came home after open heart surgery and they watched Mash. She still watches it and can repeat a lot of what they are getting ready to say or do. We got her the complete set in dvd.