Why you should make these upgrades on Can-Am Spyder RT20+
12,858
Published 2023-07-08
All parts you can find at www.martinthevlogger.com/shop
or write us to [email protected]
Over the course of a hard-working 13-15 hours, we've transformed a stock Spyder Rt20+ into a ride that's custom-tailored for one of our beloved clients. If you've ever wondered why custom upgrades are worth the time and effort, this video is a must-watch!
We've tackled a range of enhancements including the installation of the Ultimate Handling box which incorporates H&R Springs and a Swaybar. You'll get to see why we chose these specific upgrades, how they enhance the ride, and why this is considered as one of the most important upgrades for Spyder riders seeking superior handling.
One of our major tasks in this project was fitting the bike with Signature lights. You'll get to see the challenging process of their installation and more importantly, why these high-quality lights are a popular choice for the avid night riders.
Next, we've installed additional turn light signals for improved safety and visibility, a backrest for added comfort during long rides, a handlebar raiser for better ergonomics, and a pedalbox for enhancing acceleration.
For those who find comfort paramount, we've also included foam grips - a simple, yet effective upgrade that significantly improves riding experience, especially on longer trips.
Last but not least, we've installed KOTT - Radiator protectors. An essential upgrade for those who want to ensure their machine is well-protected and running at optimal performance.
Excited to know more? Hit play, and let's dive into the whole process together!
Remember, all of the products we've installed are available on our online shop. Just head over to MartinThevlogger.com/shop to grab these top-notch upgrades for your own ride. As always, make sure to like, subscribe, and leave your thoughts in the comments.
Till next time, keep the shiny side up!
In todays video you will find
0:00:01 - intro CanAm Spyder Must have Upgrades & Why by MartinTheVlogger
0:01:17 - Swaybar and Unltimate Handling box
0:03:31 - Signature Lights
0:04:16 - PedalBox
0:07:02 - Signature lights installation
0:10:03 - TurnLight signals
0:13:50 - Handlebar raiser
0:15:52 - Springs upgrade - Ultimate Handling Box
0:18:51 - BackRest for Can-Am Spyder Rt20+
0:19:22 - KOTT Grills - radiator protectors
0:20:15 - Foam grips vs Leather like grips
#motorcycle #rebuild #canam
Official MartinTheVlogger page: www.martinthevlogger.com/
Video & photo copyright: ©MartinTheVlogger
Author: MartinTheVlogger (Martin Pohanka)Camera used: 2x GoPro Hero 9 Black,
Music Credit: www.epidemicsound.com
All Comments (12)
-
Great technical vlog as ever Martin, knowledge and know how is your style, thankyou Sir
-
You should put hand sanitizer in the grips and they will slide on in 2 seconds and then it dries quickly...no fighting the fit!!
-
Great vid, So that's how we pop the front trunk off.. I have an RTL22 and have installed the Pedal Box Pro, BAJA Ron Swaybar, LamonsterGarage 2in handle bar and brake pedal risers. The fender led set, Rear bag set, Mirror leds and the front AUX led set. At 150lbs I don't think I need stiffer springs.
-
Great video and thank you as always. Do you have a video on removing the frunk of the 2020+? I know there are 4 bolts at the top and 4 screws underneath but unable to locate the remaining bolts and screws.
-
I would love a set of those ramps
-
Pretty neat.well done. Do you have a video that shows your ramp/ Jack set up and what you use?
-
I find the Can Am very interesting.
-
Did you say you have video for signature lights
-
Martin when installing grips get them started and then blast compressed air in the open end and they will slide on in 3 seconds. (https://www.youtube.com/watch?v=gKjFSVhxYqk&ab_channel=AsmallSLICEofAmerica)
-
Es hat eine polnische Registrierung. Ma Polską rejestrację.
-
First...never purchase a spyder pile of canned ham junk ..imo
