Jenny Mod, But I'm Jenny...

Mod Download: https://youtu.be/CXtd1LK7o14?si=4WypilSIA2pKIKCw

The AK-47, officially known as the Avtomat Kalashnikova (Russian: Автомат Калашникова, lit. 'Kalashnikov's automatic [rifle]'; also known as the Kalashnikov or just AK), is a gas-operated assault rifle that is chambered for the 7.62×39mm cartridge. Developed in the Soviet Union by Russian small-arms designer Mikhail Kalashnikov, it is the originating firearm of the Kalashnikov (or "AK") family of rifles. After more than seven decades since its creation, the AK-47 model and its variants remain one of the most popular and widely used firearms in the world. Design work on the AK-47 began in 1945. It was presented for official military trials in 1947, and, in 1948, the fixed-stock version was introduced into active service for selected units of the Soviet Army. In early 1949, the AK was officially accepted by the Soviet Armed Forces and used by the majority of the member states of the Warsaw Pact. The model and its variants owe their global popularity to their reliability under harsh conditions, low production cost (compared to contemporary weapons), availability in virtually every geographic region, and ease of use. The AK has been manufactured in many countries, and has seen service with armed forces as well as irregular forces and insurgencies throughout the world. As of 2004, "of the estimated 500 million firearms worldwide, approximately 100 million belong to the Kalashnikov family, three-quarters of which are AK-47s". The model is the basis for the development of many other types of individual, crew-served and specialized firearms.

I was looking for a Poseidon mod, found this video, searched up what the jenny mod is and now my search history is cursed

Imagine if someone gives you a diamond and forces you to........

The Schwerer Gustav (English: Heavy Gustav) was a German 80-centimetre (31.5 in) railway gun. It was developed in the late 1930s by Krupp in Rügenwalde as siege artillery for the explicit purpose of destroying the main forts of the French Maginot Line, the strongest fortifications in existence at the time. The fully assembled gun weighed nearly 1,350 tonnes (1,490 short tons), and could fire shells weighing 7 t (7.7 short tons) to a range of 47 km (29 mi).[1] The gun was designed in preparation for the Battle of France, but was not ready for action when that battle began, and in any case the Wehrmacht's Blitzkrieg offensive through Belgium rapidly outflanked and isolated the Maginot Line's static defences, which were then besieged with more conventional heavy guns until French capitulation.[2] Gustav was later deployed in the Soviet Union during the Battle of Sevastopol, part of Operation Barbarossa, where, among other things, it destroyed a munitions depot located roughly 30 m (98 ft) below ground level.[3] The gun was moved to Leningrad, and may have been intended to be used in the Warsaw Uprising like other German heavy siege pieces, but the uprising was crushed before it could be prepared to fire. Gustav was destroyed by the Germans near the end of the war in 1945 to avoid capture by the Soviet Red Army. Schwerer Gustav was the largest-calibre rifled weapon ever used in combat, and in terms of overall weight, the heaviest mobile artillery piece ever built. It fired the heaviest shells of any artillery piece.[4] It was surpassed in calibre only by the unused British Mallet's Mortar and the American Little David bomb-testing mortar—both at 36 inches (91.5 cm)—but was the only one of the three to be used in combat.

Cant believe he completed his journeys with that whole bakery

thanks YT I didn't need to see this

Let's be honest We all found this video on a random search 😅

why tf is the thumbnail so sus

Hog rider The Hog Rider card is unlocked from the Spell Valley (Arena 5). He is a very fast building-targeting, melee troop with moderately high hitpoints and damage. He appears just like his Clash of Clans counterpart; a man with brown eyebrows, a beard, a mohawk, and a golden body piercing in his left ear who is riding a hog. A Hog Rider card costs 4 Elixir to deploy. Strategy His fast move speed can boost forward mini tanks like an Ice Golem in a push. At the same time, he can also function as a tank for lower hitpoint troops such as Goblins as he still has a fair amount of health. Most cheap swarms complement the Hog Rider well, as they are nearly as fast as him and usually force more than one card out of the opponent's hand. The Hog Rider struggles with swarms, as they can damage him down and defeat him quickly while obstructing his path. Barbarians in particular can fully counter him without very strict timing on the defender's part, though be wary of spells. A Hunter can kill the Hog Rider in 2 hits if placed right on top of it. However, if you place something in front of the Hog Rider, the Hunter's splash will damage the Hog Rider and hit the card in front of it more. The Hog Rider in conjunction with the Freeze can surprise the opponent and allow the Hog Rider to deal much more damage than anticipated, especially if the opponent's go-to counter is a swarm, or swarms are their only effective counter to him. Skeletons and Bats will immediately be defeated by the spell, while Spear Goblins, Goblins, and Minions will be at low enough health to be defeated by a follow up Zap or Giant Snowball. However, this strategy isn't very effective against buildings as the Hog Rider will take a while to destroy the building, giving the opponent ample time to articulate another counter. Against non-swarm troops, it can deal a lot of damage during the freeze time, but this can allow the opponent to set up a massive counterpush. For this reason, players should either only go for a Hog Rider + Freeze when they have other units backing it up from a counterattack, or if the match is about to end and they need to deal as much damage as possible. It is not a good idea to send in a Hog Rider simply to destroy a building, especially if it is the only building targeting unit available, as defeating Crown Towers becomes substantially more difficult. Spells or simply waiting out the lifetime of the building are more effective. The exception to this is an Elixir Collector placed in front of the King's Tower. If a Hog Rider placed at the bridge, he can destroy the Collector for a positive Elixir trade, though the damage from both Princess Towers will usually mean he does not survive to deal any damage to them. However, if the opponent sends in defending troops, it can be an opportunity to gain spell damage value. In a deck with several low-cost cards, it might be worth it to simply send the Hog Rider against one building. These decks shuffle their card rotation quick enough, that they will arrive to their next Hog Rider before the next building arrives in the opponent's card rotation. Long-ranged troops like Musketeer and Flying Machine can snipe those buildings, preserving some of the Hog Rider's health, possibly allowing it to get some Tower damage. When there are buildings placed in the middle to counter the Hog Rider, understanding the placement of the Hog Rider and the type of building placed can help the Hog Rider to bypass certain buildings. Passive buildings such as spawners and Elixir Collector have a larger hitbox than defensive buildings; which means that if a passive building was placed 3 tiles away from the river in the middle of the opponent's side, then it is impossible for the Hog Rider to bypass that placement as the Hog Rider will get pulled to that building. Defensive buildings have a smaller hitbox than a passive building, which means if that if a defensive building was placed three tiles away from the river in the middle of the opponent's side, a Hog Rider placed at the very left or right side of the Arena may be able to bypass it due to its smaller hitbox. If the player has a building already placed down in the center of the arena, and the opponent tries to bypass it with a Hog Rider at the edge of the arena, they can use certain air troops to push the Hog Rider towards the building as it jumps over the river, effectively denying the bypass attempt. They must be already hovering over the correct placement, as very quick reflexes are required to correctly perform this technique. For Bats, Skeleton Dragons, and Minion Horde, they should be placed right in front of the Hog Rider as soon as it is deployed. For Minions, Skeleton Barrel, Mega Minion, Flying Machine, Electro Dragon, Baby Dragon, Inferno Dragon, Balloon, and Lava Hound, stagger the above placement one tile to the right if the Hog Rider is placed on the left side of the arena, and vice versa. They can also use ground troops to achieve the same result. Something like an Ice Golem deployed at the Hog Rider’s landing spot will obstruct his path and force him to go around the unit, which causes him to be closer to the building instead of the Crown Tower. The Hog Rider can kite Very Fast non-building targeting troops due to his own Very Fast speed and building only targeting if he is placed on the fourth tile from the bridge, slightly into the opposite lane. He can also stall grounded units when placed right at the bridge. He will pull them towards him while deploying, and then be untargetable by them when he jumps over the bridge. After landing, he will pull them back. This can be useful when the player needs to deal damage in the same lane they are defending. It will also help separate troops behind a tank in a large push. A Tornado placed on the second tile front of the player's King's Tower and staggered two tiles towards the Princess Tower will activate it without any damage dealt to the Princess Tower, helping them in defending future pushes. This can also be a method of mitigating all damage dealt to a Princess Tower, but doing this more than three times may result in the King's Tower's health being low enough to be targeted directly, opening up the possible threat of a back door three crown. A better alternative is to pull the Hog away from the Princess Tower into the attacking range of all three Crown Towers, which will negate all damage as long as none of them are already distracted A very powerful combo is the Hog Rider, the Musketeer, and the Valkyrie, typically referred to as the Trifecta. The Musketeer will defend against most troops, while the Valkyrie can protect her and the Hog Rider from swarms or high damage units. The Hog Rider is used to deal damage to the tower. This can be effectively countered by Lightning, one-shotting the Musketeer and severely damaging both the Valkyrie and Hog Rider. The Minion Horde is also effective, but the enemy can Zap them and the Musketeer will one-shot them all. Even if the Musketeer is defeated, the Hog Rider and Valkyrie will have enough time to severely damage the Tower. The Hog Rider should be placed behind the Valkyrie to give it a boost so that it stays in front of the Hog Rider, protecting it. A Hog Rider combined with a Goblin Barrel can be awkward for the opponent to defend against. Timing it so that the Hog Rider is tanking the tower shots for the Goblins is the most effective way to deal damage. However, a Barbarian Barrel can shut this down with minimal Tower damage for a positive Elixir trade, as long as the Goblin Barrel was placed directly on the Tower. Pairing the Hog Rider with the Balloon can deal devastating damage. If executed properly, the Hog Rider will act as a tank while the Balloon threatens to deal massive damage. The Hog Rider can also destroy any buildings attempting to slow down the combo. However, this combo is very vulnerable to swarms and anti-air cards as neither of the troops target anything but buildings. Additionally, they are easy to separate, due to the disparity in move speeds. Alternatively, the Hog Rider and the Balloon can be played in different lanes to spread the opponent's defenses thin. However, a building or Tornado can bring them back together for an easier defense. The Hog Rider can be paired with the Lumberjack as both a swarm bait and damage combo. It is a very fast combo with an extremely high damage output potential, so the enemy will likely try to counter it with a swarm. If this happens, use a spell like Arrows to render the opponent defenseless. If they manage to defeat the Lumberjack, the dropped Rage will make the Hog Rider even more dangerous than it normally is. A fast and deadly combination is the Hog Rider and Mini P.E.K.K.A. combo. Both units are fast but the Mini P.E.K.K.A. does much more damage and does not attack only buildings so the Mini P.E.K.K.A. can deal with troops like the Executioner and Musketeer. However, this combo can be defeated with swarms like Skeleton Army, which will defeat both of them since neither of them can deal area damage. They are also unable to target air troops, so the Minion Horde can stop this easily. A risky play is to deploy the Hog Rider at the bridge as soon as the match starts. If the opponent does not react fast enough, the Hog Rider will deal a significant amount of damage to the Princess Tower. This can also allow the player to quickly scout the opponent's deck if they happen to react to him fast enough

how is this not age restricted wtf???

Im starting to understand thanos.

A stapler is a mechanical device that joins pages of paper or similar material by driving a thin metal staple through the sheets and folding the ends. Staplers are widely used in government, business, offices, work places, homes and schools.[1] The word "stapler" can actually refer to a number of different devices of varying uses. In addition to joining paper sheets together, staplers can also be used in a surgical setting to join tissue together with surgical staples to close a surgical wound (much in the same way as sutures).[2] Most staplers are used to join multiple sheets of paper. Paper staplers come in two distinct types: manual and electric. Manual staplers are normally hand-held, although models that are used while set on a desk or other surface are not uncommon. Electric staplers exist in a variety of different designs and models. Their primary operating function is to join large numbers of paper sheets together in rapid succession. Some electric staplers can join up to 20 sheets at a time.[3] Typical staplers are a third-class lever. History The growing uses of paper in the 19th century created a demand for an efficient paper fastener.[4] A McGill stapler In 1866, George McGill received U.S. patent 56,587[5] for a small, bendable brass paper fastener that was a precursor to the modern staple. In 1867, he received U.S. patent 67,665[6] for a press to insert the fastener into paper. He showed his invention at the 1876 Centennial Exhibition in Philadelphia, Pennsylvania, and continued to work on these and other various paper fasteners throughout the 1880s. In 1868 an English patent for a stapler was awarded to C. H. Gould, and in the U.S, Albert Kletzker of St. Louis, MO also patented a device. In 1877 Henry R. Heyl filed patent number 195,603 for the first machines to both insert and clinch a staple in one step,[7] and for this reason some consider him the inventor of the modern stapler. In 1876 and 1877 Heyl also filed patents for the Novelty Paper Box Manufacturing Co. of Philadelphia, PA,[8] However, the N. P. B. Manufacturing Co.'s inventions were to be used to staple boxes and books. The first machine to hold a magazine of many pre-formed staples came out in 1878. On February 18, 1879, George McGill received patent 212,316[9] for the McGill Single-Stroke Staple Press, the first commercially successful stapler. This device weighed over two and a half pounds and loaded a single 1/2 inch wide wire staple, which it could drive through several sheets of paper. The first published use of the word "stapler" to indicate a machine for fastening papers with a thin metal wire was in an advertisement in the American Munsey's Magazine in 1901.[4] In the early 1900s, several devices were developed and patented that punched and folded papers to attach them to each other without a metallic clip. The Clipless Stand Machine (made in North Berwick) sold from 1909 into the 1920s. It cut a tongue in the paper that it folded back and tucked in. Bump's New Model Paper Fastener used a similar cutting and weaving technology. The modern stapler In 1941 the type of paper stapler that is the most common in use today was developed: the four way paper stapler. With the four way, the operator could either use the stapler to staple papers to wood or cardboard, or used to staple like pliers for bags, or the normal way with the head positioned a small distance above the stapling plate. The stapling plate is known as the anvil. The anvil often has two settings: the first, and by far most common, is the reflexive setting, also known as the "permanent" setting. In this position the legs of the staple are folded toward the center of the cross bar. It is used to staple papers which are not expected to need separation. If rotated 180° or slid to its second position, the anvil will be set on the sheer setting, also known as the "temporary" or "straight" setting. In this position the legs of the staple are folded outwards, away from the cross bar, resulting in the legs and cross bar being in more or less a straight line. Stapling with this setting will result in more-weakly secured papers, but a staple that is much easier to remove. The use of the second setting is almost never seen, however, due to the prevalence of staple removers and the general lack of knowledge about its use.[10] Some simple modern staplers feature a fixed anvil that lacks the sheer position. Modern staplers continue to evolve and adapt to the changing habits of users. Less-effort, or easy-squeeze/use staplers, for example, make use of different leverage efficiencies to reduce the amount of force the user need apply. As a result, these staplers tend to be used in work environments where repetitive, large stapling jobs are routine. Some modern desktop staplers make use of Flat Clinch technology. With Flat Clinch staplers, the staple legs first pierce the paper and are then bent over and pressed absolutely flat against the paper – doing away with the two-setting anvil commonly used and making use of a recessed stapling base in which the legs are folded. Accordingly, staples do not have sharper edges exposed and lead to flatter stacking of paper – saving on filing and binder space. Some photocopiers feature an integrated stapler allowing copies of documents to be automatically stapled as they are printed. Industry In 2012, $80 million worth of staplers were sold in the US.[11] The dominant US manufacturer is Swingline. Methods An exploded view drawing Permanent fastening binds items by driving the staple through the material and into an anvil, a small metal plate that bends the ends, usually inward. On most modern staplers, the anvil rotates or slides to change between bending the staple ends inward for permanent stapling or outward for pinning (see below). Clinches can be standard, squiggled, flat, or rounded completely adjacent to the paper to facilitate neater document stacking. Pinning temporarily binds documents or other items. To pin, the anvil slides or rotates so that the staple bends outwards instead of inwards. Some staplers pin by bending one leg of the staple inwards and the other outwards. The staple binds the item with relative security, but is easily removed. Tacking fastens objects to surfaces, such as bulletin boards or walls. A stapler that can tack has a base that folds back out of the way so staples drive directly into an object rather than fold against the anvil. In this position the staples are driven similar to the way a staple gun works, but with less force driving the staple. Saddle staplers have an inverted V-shaped saddle for stapling pre-fold sheets to make booklets. Stapleless staplers, invented in 1910, are a means of stapling that punches out a small flap of paper and weaves it through a notch. A more recent alternative method avoids the resulting hole by crimping the pages together with serrated metal teeth instead.

Truly a certified jenny mod classic

BRO THAT THUMBNAIL 💀💀💀

Bionicle is a line of Lego construction toys, marketed primarily towards 8-to-16-year-olds. The line originally launched in 2001 as a subsidiary of Lego's Technic series. Over the following decade, it became one of Lego's biggest-selling properties, turning into a franchise and being one of the many factors in saving the company from its financial crisis of the late 1990s. Despite a planned twenty-year tenure, the theme was discontinued in 2010, but was rebooted in 2015 for a further two years. Unlike previous Lego themes, Bionicle was accompanied by an original story told across a multimedia spectrum. It depicts the exploits of the Toa, heroic biomechanical beings with innate elemental abilities whose duty is to maintain peace throughout their universe. Bionicle's success prompted subsequent Lego themes to use similar story-telling methods.

Boy ain't no way this monetized with THAT thumbnail, I'm mad jealous 😒

translation: minecraft but nothing has changed

Has anyone else entered through the thumbnail?

Bro knows exactly what he's doing 💀