How To Install Pot Filler

Published 2020-01-18
In this video I will walk you step by step on how I installed Pot Filler in the kitchen. Learn about the challenges I ran into to close it and challenges I ran into as part of working on the project.

Subscribe on YouTube: www.howtoanalyzedata.net/youtube


__________
LETS CONNECT!!!
Subscribe on YouTube: www.howtoanalyzedata.net/youtube
Connect on LinkedIn: www.howtoanalyzedata.net/linkedin
Subscribe to Email: www.howtoanalyzedata.net/email
Facebook Group: www.howtoanalyzedata.net/facebook
Facebook Page: www.howtoanalyzedata.net/facebookpage
Instagram: www.howtoanalyzedata.net/instagram
Pintrest: www.howtoanalyzedata.net/pintrest
Follow on Twitter: www.howtoanalyzedata.net/twitter
Become a FAN! www.howtoanalyzedata.net/store
Follow on Social Media: www.howtoanalyzedata.net/follow

#handyman #tips #tricks #homeimprovement

All Comments (21)
  • @maddoxinc1642
    Instead of drilling fragile tile, you can get a mason diamond bit for a dremel and grind a hole in the tile. You should have wood directly behind the tile to screw into.
  • @73mazer
    I thought this was going to show how you ran the pipes, that's what I needed to know
  • @JonathanW5444
    I would never use a wrench on threads like that, too much of a risk to cause a leak, you said it yourself "I never have luck with those threaded connections". They make inside pipe wrenches that are made for this purpose!
  • @azngirl911
    What brand/model is that pot filler? I have the same one from previous owner and the top handle is having issues
  • You used pipe dope only and no teflon tape…How did that not leak?
  • @dave_in_florida
    hope that one screw in the glass backsplash doesn't come loose
  • @knocturna9731
    I don’t usually like subway tile, but that backsplash is absolutely gorgeous.
  • @ecjfla44
    you should wrap the threads before you use a wrench on threads
  • @NhatKhong13
    How did you run the pipe through the wall? I find that's more difficult
  • My pot filler just fell off the wall. They didn't use the right nipple, they didn't use the set screws it was just sitting there balancing.