The Easiest Way to Remove Paint to Bare Metal!

Buy the Official Paint Society Spray Suite Here! amzn.to/3IXYkD1

Great video. I would like to give you a word of caution when using a paint stripper like this. I am a retired Air Force aircraft painter with 40 years experience. I'm sure this product is not as strong as the stuff we use, but the fumes can be very dangerous. Please do not use the type of mask filters the guy is wearing in the video. Those are made for heavy particulates and or dust, not vapors and fumes. Those type off ilters will do nothing to stop the vapors from that paint stripper. If anything they will concentrate the fumes more inside the mask. When using this stuff, be sure to use an organic vapor and mist rated filter on your respirator. Check the instructions on the different types, but I believe the ones needed are the pink and black style or the pink and yellow 3M style cartridges for that type of mask. The proper cartridges have a charcoal layer inside the cartridge and a prefilter that helps stop the fumes and vapors. A full face would be better for eye protection. Be safe out there everyone.

My toxic trait is watching videos like this and thinking "He makes it look and sound so easy, I should try it!" without thinking about the 20 years of experience that went into making it look easy.. Who's with me? 🤣

I work in a shop, we recently stripped a set of wheels with this same product. To say it works great, even on powder coating it takes a bit longer. Just don't let it dry out, the slag paint becomes harder than it was. Great stripper. Wear eye protection,gloves, and probably outside.

A couple of decades ago I had to strip a hood which was painted multiple times by a so called professional. It has so many layers of paint it actually looked like a cheap fiberglass hood. I used the same process shown using plastic sheeting to capture the active ingredients while is worked. The hood was stripped clean and primed, painted, cleared. The shop manager was happy and more importantly, the customer was happy.

All killer, no filler. Very impressive because I know that it is a lot of work to make it look easy.

Just what I needed to see to inspire me to finally strip and paint the hood of my Tahoe. Except its not a project, it's my daily. 😅 and I have always appreciated how the steps and explanations are geared towards those who are predominately do-it-yourselfers.

I love this channel, I always learn something. Brian is a great teacher, he's clear, doesn't repeat himself over and over, he gets right to the point no endless backstories, and no uhs or ums. Really wish I saw this before I painted my truck black. I'd love to see a video on buffing too.

Lovely. Prepping for a project and trying to learn ahead of the work. This was certainly above my pay grade but beautiful results. Most chemical paint removers I've seen or used can't fight their way out of a paper bag because of healthandsafety but great tip to cover. As ever, loads of great help here. Many thanks!

Bro you make magnificent videos. You are a teacher at heart. Thank you for your vids.

Thanks Brian! Have you ever tried Coopers Strip Club products made in New Zealand? I’m restoring a Jaguar E-type coupe, I used their system and it was terrific - I stripped the entire car to bare metal. You spray it on with just a pump sprayer, let it sit for a bit then take the paint off with steel wool and a metal blade. Nearly no oder, a lot less messy and easy clean up!

I have to strip the paint in my 91 Firebird hood. This is exactly the video I needed!! Thank you.

Thank you so much for this Brian. Your videos and tips/tricks of the trade are nuggets of gold. Cheers

Awesome Tutorial! Thanks for sharing!

Thanks Paint Society, this was a very good description of the process and steps to take for a great paint job.

That finish turned out great

Great video, I too use that paint stripper but when I covered with plastic, it didn't pill as easy as it did for you, I had better results without. And I have better results in my paint jobs when I do a 50-50 or 75 overlap. Thanks for what you do.

Keep up the great work. I ALWAYS love watching your content. You keep it real and basic so that guys like me can learn easily. Cheers

That looks fantastic ! Thank you. It's great to watch a Profesional.

Eastwood contour sct tool will definitely get the job done