How to Manually Adjust the Anycubic Kobra Max Bed @ANYCUBIC3D
14,186
Publicado 2022-11-12
Support me on Patreon: tinyurl.com/wdyvhsmb
Or you can simply buy me a coffee: tinyurl.com/2btrh3z9
More Videos You Might Like….
-Leathercraft, Making a Stitching Pony: tinyurl.com/yate3sa
-3D Printing, Making a Blunderbuss: tinyurl.com/42y52cz5
-Tool Restoration, Rusty Axe Restoration: tinyurl.com/383v9rte
My Camera Gear:
Andycine C7 Field Monitor: amzn.to/3ef2mIc
Sony A6600: amzn.to/3ecYAPu
Aputure MC Lights: amzn.to/3AZrSew
DJI Ronin SC2 Gimbal: amzn.to/3B2l0wH
Canon M50: amzn.to/3nU2ekB
Mavic Air II (for larger shoots): amzn.to/2Hfq09K
GoPro Hero: amzn.to/3lSfwfB
Mavic Mini (for when I’m just around the shop): amzn.to/352PkIC
Rode Video Mic Pro: amzn.to/3k81RAH
__________________________
Video Name: [How to Manually Adjust the Anycubic Kobra Max Bed]
Video Number: 0255
Published Date: 2022-11-12
#primaledge #HowTo #anycubic
Todos los comentarios (21)
-
Hello sir, I really need your help. I'm using zombie fw on the printer, to get more precise z offset, also it adds 7x7 leveling grid. However when I used octoprints bed leveling vizualiser, my bed is terribly saging in the middle. I tried to investigate and there are two screws in the middle of the bed. On these screws, there are spings, but no nuts. When I press on the bed in the middle I can flex it like several millimeters down. Also I'm using the flexible metal palte. Thank you, very much.
-
This is legit the only thing that fixed 90% of my first layer issues. Have no idea why this isn't a provided instruction for assembling the printer. Thanks a ton!
-
I’d love to see you go through the actual process of doing the work to level it. I understand the concept seeing you execute it would be immensely helpful
-
Your a godsend this and the back bars video helped zero in my printer it was horrendous out the box and couldn’t figure it out
-
Thanks so much for this! Watching my first print after the adjustment and it's worlds better. Quick Tip: I found that loosening 1 screw was enough to take the tension off the belt enough to adjust one side without affecting the other.
-
Thank you so much I was beating my head up against the wall trying to figure out how I was going to fix this problem. Your solution was perfect. Thank you once again.
-
Yeah man... I love these machines. I just bought my second one and seem to be having this same issue, though more on one than the other. Awesome insight. Thanks. I will give this a go on both after this Daredevil helmet comes off. On the one sitting... the nozzle goes WAAAAY off the bed in certain areas. It is crazy to watch. I hope this helps.
-
You are amazing good sir. I have been fighting this for a week with no luck finding any info. Thank you thank you thank you
-
Hello all. I was getting ready to do this. But before I did I took my bed off to clean it and noticed the screws that screw into the post below the heater that bed sits on. On my machine all those 2.5mm allen screws were loose. I tightened them all up and it fixed my issue. Just something simple to check.... Thanks for the video!
-
Thank you for that. I'll make sure to check it when my MAX arrives.
-
Nice video mate, had the same issue hunting down how to level the bed myself. The left side was much higher. In fact the nozzle would scrape the bed at stating movement but be too high in the middle. Going to get this method done for my next print.
-
Thank you for sharing!! I just got mine and was also shocked how little instructions I can find about this kind of thing
-
Thank you, sir. I am enjoying my Anycubic Kobra Max. Looking to hearing more from you about this printer.
-
Awesome ! Thank you so much for the tip ! I have also been looking for this issue for a while !
-
Hey man I appreciate you posting this.
-
Great video, I have the Kobra 2 Max, Kobra 2 Plus and the Kobra 2 Neo, I've gotten on successfull print off the max and plus then it went hell, the Neo worked perfectly until yesterday and I've had it for almost 2 months the max and plus less then a month I'm going to try this because it sounds exactly like what I am facing thank you
-
I have a Sovol SV 03 and an Ender 3 Pro too. The Kobra Max is the best and most reliable. The Anycubic Mono X is my only resin printer right now. I want the Mono Max next though. I agree though. I think I am going to stick with Anycubic and build my entire workshop with the Kobra Max and Mono Max.
-
This saved me! Thank you!
-
Also, check and see if the printer's head/nozzle (whatever you want to call it) is loose on the horizontal axis. you can tighten the lower wheel.
-
Great Video and just what I needed as mine was the same. To ask where did you get the flex plate for yours? Again thank you for the info on the level problems.
